Lining Channel

Wall lining systems are an efficient and cost effective way to transform the interior of any building. They’re a great option for providing a clean finish to internal walls, and they can be used in both residential and commercial settings. Designed to be installed quickly and easily, they allow for a rapid transformation of any interior space. In this post, we take a look at what the wall lining system installation process involves, and what you need to know. Keep reading below to learn more, and if you have any questions, please do not hesitate to get in touch with us via the details at the bottom. 

Wall Lining Systems: A Quick Introduction

Essentially, wall lining systems are a quick, easy and cost-effective way of lining walls in new builds or renovation projects. With a wall lining system, there is little to no background preparation required, and it enables a smooth plasterboard finish to be placed over rough brick surfaces. Whilst there are alternatives for dry lining walls, there are very few that are as quick, efficient and effective as a proper metal wall lining system. 

What Do you Need to Install a Wall Lining System?

When it comes to installing a wall lining system, there are a number of main components that you will need for the process. This includes liner metal stud, liner track, drywall brackets, channel connectors (for extension if needed), wafer head screws and drywall screws. If you need any assistance with finding the components needed for a wall lining system, then visit Online Insulation today. 

What are the Steps Involved in Installation?

    First of all, you need to prepare the wall – but really, very little preparation is needed. But, if skirting boards are removed, then plaster won’t often reach the floor’s surface, and there can be gaps between the floorboards and masonry wall. If this happens, fill the void to minimise air leakage when the wall liner is installed. Furthermore, if there are any electrical outputs or services, make sure that these have been isolated before beginning.Next, you need to determine the standoff for your wall lining system. In order to do this, you need to take into account the high point of the wall or any services located in the lining system. 

Use a straight edge and level to calculate the standoff, and when it’s found, mark plumb positions of the track on the floor and ceiling. Then, use a chalk line to show the position of the track. Next, fix the track to the perimeters of the wall, with the longer leg to the room, and appropriate fixings at 600mm centres.

    Thirdly, install the brackets. Mark the wall at 600mm vertical centres, and horizontal lines at 800mm centres, to show the positioning of lining channels and bracket fixings. Next, fix each liner bracket with its rings to the wall via the bracket slot using suitable fixings.The next step is to install the liner studs. Install them across the wall at marked and bracketed sections, as well as at openings and internal or external angles. When you install the channels, pull them towards you to put pressure against the track; this will allow you to slide it into position. 

Make sure the channels are cut to a good fit within the track, so they fit neatly inside and not on top. With the channels in position, bend the brackets forward and fix using a wafer head screw through the bracket’s furthest-back hole against the channel. Bend back any protruding bracket legs, so they’re away from the channel face. At internal angles or corners, bend one side of the bracket across the channel face and fix with a wafer head screw to secure it in position.

    The fifth step is to install the lining system at openings. For this, you need to use a liner track and mark it 150mm wider than the opening on both sides. Then, cut and cloak over the lining channel on either side, before securing it with wafer head screws into the channels. Next, install short sections of liner stud above the opening for extra support. Finally, fix with wafer head drywall screws.The last step is installing the plasterboard. You need to measure the height of the board required and cut to fit. Next, fix the plasterboard to the lining system at 300mm centres. Where there are openings, return the thermal board into the reveals to stop thermal bridging around these points. 

Sealant can be used as an adhesive, and then fixed at 200mm centres, making sure the linings are sealed to reduce air leakage. If your wall has services such as electrical outputs, then these may need plywood pattressing. Make sure to continue installing plasterboard until the lining system is fully complete.

Wall Lining Systems at Online Insulation

Here at Online Insulation, we stock products for wall lining systems at low prices, giving superb value for money. Our wall lining systems products include lining channels, liner bracket, wall lining connector, lining track and more. All of our products enable you to create an effective wall lining system for your application. If you need any assistance with choosing the right product for your needs and requirements, then please do not hesitate to contact us today. You can reach us by phone on 01509 649065 or email us at info@onlineinsulation-sales.com. With free delivery on orders nationwide over £350+ VAT and superb discounts, Online Insulation is the number one place to visit for all insulation and drylining products.